Readme

Collapse
No announcement yet.

3rd gen side skirts *pictures*

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Here's pics of mine!




    Comment


    • #32
      Hey jmack what did u do to yours? I notice they dont even sit in the door jam. I like how they sit so flush with the side of the car. Could you share how you achieved this? Really intrested, how to cut, where to cut, and what materials you used. TIA

      Comment


      • #33
        What I did was follow most of the steps that another member posted before. The inner part has these mounting points which you need to cut out. Then all I did was heat and bend the part that slides into the door jam inwards so that it would sit flush with the rocker panel. This heating and bending takes awhile because you want it to be straight and flush with the rocker panel. Once you have it bent inwards properly, it now acts as a good mating surface to your rocker panel depending on how you want to mount it. You can either use double sided tape (which I used) or you can use some nuts/bolts/screws if you want to modify your rocker panel. I suggest using double-sided tape.

        Hope this helps!

        Comment


        • #34
          here is my g3 sides finished off with the accord rear lip....
          http://www.g2ic.com/forums/showthrea...1&page=1&pp=20

          Comment


          • #35
            Years later I cant view any of the pictures! I just picked up some from my local junk yard 30$ for both and I need to know where and how to cut! And pics would be nice

            Comment

            Working...
            X