Readme

Collapse
No announcement yet.

g3 side skirt installation

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • g3 side skirt installation

    yes, ive search, the thing is most of the links are dead(pic. also)
    and i need like a good step by step draw out..i mean, its all there on search but, like i said "links are dead" and its hard to follow where to cut so, if anyone can email it to or post up it would be very helpful.

  • #2
    here is a link to a write up i did a few months back...if you need more pics just email me...http://g2ic.com/forums/showthread.php?t=116639 good luck

    Comment


    • #3
      okay im gonna give your way a try..so basically, cut all the overhang off, leaving 1/8th of an inch. is thats just the same amount how the overhang line was at? or do i cut more of that off ?

      and what about that part(area thats circle and pointed)

      Comment


      • #4
        I will take more pictures tomorrow that will show you what you're asking...also the area you circled needs to be left intact, that's where you bolt them in.

        Comment


        • #5
          okay i went on my own so far, everything has been cut. now, test fitted, only thing is i can't seem to get the screw to go into my mudd flap hole..but, sure post'em up so i can compare..and any help w/the screw would be cool.

          Comment


          • #6
            Did you re-use the mud flap scew? that's what i did.

            And here is the best pic i could take of the overhang.....
            Attached Files

            Comment


            • #7
              im so busy i haven't even had the time to do this little but some what hard mod..

              im missing on bolt for the mud flap what size and type is it ?

              Comment


              • #8
                can some one update this tread with the pictures ? please please or send me a email how to do this diy side skirt bolt on

                Comment


                • #9
                  [email protected]

                  Comment

                  Working...
                  X