Readme

Collapse
No announcement yet.

intercooler piping

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • intercooler piping

    Hey guys i have a plm ramhorn manifold with a ebay turbo and was thinking installing it on my DA. It seems like intercooler pipe routing is the hardest thing about this install. How do you guys have yours routed?
    B18CR
    190whp 131torque
    [email protected]

  • #2
    Mine is a miniram, but I did it like this. It comes off the turbo with a 90 degree coupler then wraps around and down to the intercooler. A bit of the bumper beam had to be cut out, but you can't really avoid that no matter how it's ran

    Comment


    • #3
      Mine is very similar, I am running a full radiator so I had to make that bend behind it. Obviously some cutting of the rad support was required but minimized..



      Comment


      • #4
        I'll try and find a pic later but I have a backdoor intercooler so I have the turbo clocked so the outlet points straight forward into the back of the intercooler and then my cold side is just like 512_SIRII's but I prefer the way that BLACK1's is run.

        Comment


        • #5
          Cool photos! we see immediately that did a good job! Super!
          Last edited by sova64; 06 Mar 2017, 21:20:21.

          Comment

          Working...
          X