Readme

Collapse
No announcement yet.

IL: Part Out - Full 93 GS-R

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    IL: Part Out - Full 93 GS-R

    UPDATE!!! BODY AND MISC HAS GONE TO THE J-YARD. CITY PUT A TOW STICKER ON THE CAR AND I TOOK OFF WHAT I COULD THAT I THOUGHT MIGHT SELL.

    I HAVE 90% OF THE INTERIOR (BLACK)
    BOTH MOTORS (READ BELOW FOR CONDITION BEFORE ASKING)
    B17 ECU
    3-SPOKE STEERING WHEEL
    TURN SIGNAL LIGHT FOR STEERING COLUMN
    ALTERNATOR
    DISTRIBUTOR
    FULL A/C SYSTEM
    STARTER
    FRONT MUD FLAPS
    JDM SIDE MARKERS (YES THEY ARE STANLEY)
    OTHER MISC. MODULES

    I WILL TRY TO UPDATE THIS LIST FULLY SOON. BUT I CAN TELL YOU I HAVE NO BODY PANELS OR WIRE HARNESS OR GLASS.


    I forgot about the regulations and my thread apparently got deleted... Oops! Hopefully this one meets and will stay.

    As the title states, I have decided to part out my 93 GS-R. Body has 296k on the odometer. Currently has a JDM B16 that has jumped time after missing on a drive home. compression checks as follows (180/180/180/200) Have the original B17 (#1 rod bearing is shot, have not torn it apart to find out if anything more wrong) Car has typical honda cancer on the rear quarters, some on drivers door and hatch.

    To easier get a hold of me email me at: mzeglis@gmail.com

    More part Images on Page 6



    Red/Amber Tails



    JDM Headlights (SOLD) and Clear Bumper Lights



    JDM Headlights (SOLD) and Amber Bumper Lights



    Interior and Arm Rest (ARM REST SOLD)



    Valve Cover is quite this clean still but close (Had it powder coated in 08). (PLUG WIRE COVER SOLD)



    If you want more photos of other items just ask me!!!

    I DO NOT HAVE OEM FLOOR MATS (SORRY)

    Some basics of upgraded parts are as follows:

    JDM 1-piece headlights (no cracks or chips, not crystal clear, but in good shape) SOLD
    K&N stock filter
    Skunk2 weighted shift knob
    90-00 civic short shifter (SOLD)
    JDM amber side markers
    Amber bumper turn signals
    also have all clear bumper turn signals
    Ground Control Coil Overs (tokiko HP Blues passanger rear is blown)(these coilovers will only fit the following shocks: Stock/OEM, Sachs, Tokico HP ('Blues'), Tokico Illumina ('Whites')) (SOLD)
    Trans was disassembled with honda mechanic and carbon coated syncros installed (SOLD)
    Hi-Flow Cat
    OEM Acura sunroof visor (has hairline crack but doesn't affect it at all)
    DOHC Fender Moldings
    Exeddy Stage 1 racing clutch and pressure plate (SOLD)
    ACT 11.5 lbs flywheel (both clutch and flywheel have about 40k on them but had no problem spinning 2nd and chirping 3rd with them) (SOLD)

    Good stock parts:
    Virgin stock ECU
    Front and Rear Stock Mud Flaps (REARS SOLD)
    Red/Amber tails in mint condition
    Gray/Blue interior mint except Driver seat has tear on side bolster.
    Arm Rest with cup holders (SOLD)
    A/C-Heat controls
    Interior switches
    stock cat-back exhaust replaced a little over a year ago
    Alternator
    starter
    PS pump
    reservoirs
    VTEC side moldings
    Many other parts are still good.

    I also have the full Factory Service Manuals (two books about 1-1/2" thick each that cover everything down basically to the size of every bolt)

    I also have a set of SI rims. some have oxidation on them. started to sand down one of them. Tires are shot.
    $250

    Much rather not ship these if possible.







    If someone wants to buy it all outright Awsome, but I'll take reasonable offers on all parts.

    If you need something and don't see it, just ask.



    FOLLOWING ITEMS ARE SOLD:

    JDM 1-PIECE HEAD LIGHTS
    CLUSTER
    ENGINE HARNESS
    BODY HARNESS
    RADIATOR AND FANS
    INTERIOR PANEL UNDER STEERING COLUMN WITH COIN TRAY
    POWER STEERING PUMP BRACKETS
    SPARK PLUG COVER
    ARMREST
    REAR MUD FLAPS
    SHORT SHIFTER
    OEM INTAKE BOX AND TUBE (K&N FILTER STILL AVAILABLE)
    GROUND CONTROL COIL OVERS
    DRIVER'S DOOR WINDOW SWITCH
    DOOR SIDE MOLDINGS
    TRANSMISSION
    MOTOR MOUNTS
    CLUTCH / FLYWHEEL
    VTEC MOLDINGS


    All other items are still for sale ask for price and shipping cost.
    Last edited by ziggy7; 25 Sep 2013, 22:41:13. Reason: FOR SALE/SOLD ITEM LIST UPDATED

    #2
    How much for taillights shipped to 92804?

    Comment


      #3
      I'm asking $150 for the tails, ( you are second in line) I will calculate shipping with insurance after I'm off work tonight.

      Originally posted by itisbernie View Post
      How much for taillights shipped to 92804?

      Comment


        #4
        How much for the drivers-side mirror shipped to Florida?

        Comment


          #5
          What are you asking for the 1 pieces? Are you willing to sell them separate? What kind of wire is that coming off the battery? 4 gauge? Are you selling the plug wire cover separate or are you trying to sell it with the valve cover? How much for the fuse box cover in the engine bay? How much for the little panels that cover the rear shocks in the trunk?

          Comment


            #6
            Pics and price of the floor mats?

            Comment


              #7
              $35 for the drivers side mirror. I want to double check for you though, I know one of the two had a crack in the housing. If this is the non crack $35 shipped.

              Originally posted by nf_ekt View Post
              How much for the drivers-side mirror shipped to Florida?

              Comment


                #8
                Floor mats are not stock. Those were gone before I got the car. Sorry.

                Originally posted by derek21 View Post
                Pics and price of the floor mats?

                Comment


                  #9
                  1-Pieces have 3-4 people in line already so I won't split them up.
                  Yes I have a 4ga wire running to a breaker that ran my subs when I had them in the car.
                  I have someone who has asked about the plug cover, if they say no $25.
                  and the other three covers you asked about $25


                  Originally posted by DA_all_day View Post
                  What are you asking for the 1 pieces? Are you willing to sell them separate? What kind of wire is that coming off the battery? 4 gauge? Are you selling the plug wire cover separate or are you trying to sell it with the valve cover? How much for the fuse box cover in the engine bay? How much for the little panels that cover the rear shocks in the trunk?

                  Comment


                    #10
                    Cool. Put me in line for the plug cover.

                    Comment


                      #11
                      Armrest shipped to 06824 Fairfield Ct

                      Comment


                        #12
                        I have stated in the other forums I have this listed. Due to the three forums and amount of PM's I have coming in. after tonight, parts will become First to pay gets the part from then on. It is too hard to track through PM's and thread post who was first and such. So If I've told you that you are "in-line" contact me first thing tomorrow and the first one to pay for the part if I still have it, gets it.

                        Comment


                          #13
                          If the person in line in front of you backs out or doesn't make arrangements before tomorrow, $100 shipped.

                          Originally posted by brentpadgett View Post
                          Armrest shipped to 06824 Fairfield Ct

                          Comment


                            #14
                            how much for vtec molding and rear spoiler with brake light and rear filler with the gsr emblem lmk want it.

                            Comment


                              #15
                              VTEC moldings are pending to at least 3 people right now, $55 shipped.
                              Spoiler bolts will likely break when removed, I would have to look into shipping on it but I'd say $100 + shipping
                              Mid Panel does have some rust on it now, I can take a photo later tonight or first thing in the morning. I think the rust started under the GS-R emblem.


                              Originally posted by acura_madness View Post
                              how much for vtec molding and rear spoiler with brake light and rear filler with the gsr emblem lmk want it.

                              Comment

                              Working...
                              X